How To Setup The NerdQaxe++

Follow each step below to complete the guide.

Step 1

Unbox and connect to power.

Connect the XT30(yellow connector) on the miner to the power supply first!

Then connect the power supply to the wall.

NOTE: When unplugging the unit, always do it from the wall first then the unit second. This prevent problems.

Step 1

Unbox and connect to power.

Step 2

Connect to the WiFi.

Let the unit sit for a minute or two, then you will see a new WiFi network called Nerdaxe. Join it. It might take a bit of time, but a window should pop up.

Step 3

Press settings.

Step 4

Enter in your WiFi info.

Fill in the WiFi settings.

Hostname, you can leave it be unless you want to change it.

WiFi Network: Your WiFi name
WiFi Password: Your WiFi password.

Step 5

Scroll down.

Press save and then press restart.

Step 6

Access the dashboard.

After the unit reboots you will see on the display a IP address at the top. Type that into your we browser and you can now access your miner!

The machine is about 90% setup. You will want to configure the pool information next so if your device mines a Bitcoin you will get paid. You can click here to follow that guide!