Tutorial guide
Follow each step below to complete the guide.
Step 1
Connect the barrel jack on the miner to the power supply first!
Then connect the power supply to the wall.
NOTE: When unplugging the unit, always do it from the wall first then the unit second. This prevent problems.
Step 2
After about a minute or two you should see a new WiFi network called Bitaxe. Join it.
Step 3
A captive portal will popup after joining the WiFi network. You can leave Hostname alone or change it to something like BitaxeGamma602.
Wi-Fi SSID needs to be your home wifi network.
And Wi-Fi password, is the password.
Then press save, and restart.
Step 4
After the unit reboots you will see a screen that shows the IP address to the miner. If you dont see the screen right away you can press the boot button on the side to cycle though the screens or just wait for it to show up. Type this IP into your web browser.
Step 5
So the unit has been setup. The next thing we want to do is setup the mining pool so you can start to solo mine some BTC. CLICK HERE for that guide!